Quick Answer: Which RAM Slots To Use First?

How do I activate both RAM slots?

Resolving The ProblemInstall the DIMM memory upgrades into empty DIMM memory slots.Boot the machine and press F1 to get into BIOS, then select Advanced Settings, then Memory Settings, and change the corresponding DIMM slots option to “Row is enabled”.Save the BIOS settings and reboot..

Is it better to have 1 16gb or 2 8gb?

Depends on how many slots you have on the motherboard. If you have 2 slots, a single 16gb is better,since you can upgrade in the future easier. If you have 4 slots or you don’t plan to ever upgrade, 2x8gb is better since that is faster and will increase the performance of your pc.

What happens if you put RAM in the wrong slots?

If ram is in the wrong slot then it wont boot. If you have two sticks of ram and two slots there is no such thing as a “wrong slot”.

Can I add 8gb RAM to 4gb laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Does it matter what slots I put my ram in?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

Is it better to have 4 sticks of RAM or 2?

So, you get the most performance when you use at least one stick on each memory channel, so two memory sticks. If you install four memory sticks, you won’t get better performance, it’s still just two memory channels transferring data to the processor cores.

How do you make sure all my RAM is being used?

What To TryClick Start. , type msconfig in the Search programs and files box, and then click msconfig in the Programs list.In the System Configuration window, click Advanced options on the Boot tab.Click to clear the Maximum memory check box, and then click OK.Restart the computer.

Is it better to have 1 stick of RAM or 2?

Typically, single sticks of RAM are less expensive than dual kits. … If you can only afford 8GB of RAM right now and a motherboard with only two DIMM slots, it might make more sense to go with a single 8GB stick of RAM rather than dual 4GB sticks of RAM.

How much faster is 16gb RAM than 8gb?

The more data that needs to be loaded onto the SSD the slower the system becomes. With 16GB of RAM the system is still able to produce 9290 MIPS where the 8GB configuration is over 3x slower. Looking at the kilobytes per second data we see that the 8GB configuration is 11x slower than the 16GB configuration.

Do both RAM slots need to be filled?

It depends on your system. If it supports dual channel memory only, there is no advantage to installing more than 2 modules. If it supports 4 channel memory, installation 4 modules will perform better. Go with the largest sticks your motherboard will support.

Does RAM have to be in first slot?

If you are using SDRAM or single-channel DDR-SDRAM, then it usually doesn’t matter which modules go into which slots. But a few motherboards require that you start with the first slot and fill them in order, so you may as well do it that way.

Is it better to use 2 or 4 RAM slots?

Installing four memory modules in a dual-channel system can improve performance in certain scenarios. … It’s also worth noting that four modules can also limit memory performance in the sense that you might not be able to achieve the same frequency and timings that you could with just two modules.

Can I leave one RAM slot empty?

You can leave a slot empty but there will be a relative performance loss.

Is 32gb RAM overkill?

32GB, on the other hand, is overkill for most enthusiasts today, outside of people who are editing RAW photos or high-res video (or other similarly memory-intensive tasks).

Why don’t you put Ram next to each other?

1. Because that’s the way the slots are wired. 1 & 3 on one channel, 2 & 4 on the other channel. If that’s numbering the dimm slots sequentially going away from the CPU I’m not sure it’s correct if you want a dimm in each channel for dual channel operation.

How do I know if my RAM slot is bad?

The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard. Boot your computer.

How do I check my RAM slots in BIOS?

To determine if your motherboard is “seeing” all of your RAM, enter your computer’s BIOS. To do so, restart your computer and press the key that appears on your screen while booting (often Delete or F2). Locate the system information section and look for information on the amount of RAM in your computer.